Mounts to Any Surface with the Proper Hardware

Great for Large Format Banner Media.

Holds 7 rolls 

The 2 Rack Rails, Left and Right are 71" top to bottom.

4 Pre-drilled holes

Rack Color - Yellow

The bracket sticks out 5.5" from the wall

Max roll size 10"

Contents – Left (marked) and Right aluminum Racks only

We do not supply the poles. 

We recommend  1"steel conduit or aluminum poles that are cut to your size requirements.

  You can get the poles at Home Depot-Lowes or your local hardware store.

1.     Determine the mounting hardware to be used. For drywall installations we suggest “x 3" Toggle Bolts and flat washers.
2.     Determine the location of the first rack sideto be mounted using a level to mark the location of the holes. Mount Strut to the wall with the proper hardware capable to withhold total roll weight.
3.     Determine the distance you require between the Struts (48” Rolls require 50” inside width. 60” Rolls require 62” inside width)
4.     Use a large level or straight edge and a level to mark the top of the second side to be mounted.
5.     Use a level to locate the mounting holes to mount the second side to be mounted. Mount the Strut to the wall with the proper hardware as shown to the left.

Note: The strength and usefulness of this rack will be determined by the proper mounting hardware used for your particular wall. Spend the money on high-quality and correct mounting hardware! A lifetime of satisfaction can be achieved!