New Simple Shape. Works great along edges or at corners.
No neck loop for improved appearance.
Fast and Easy to install
Use these Power Tabs to turn your digital banners into a super strong outdoor banner instantly.
No Hang loops to cut off.
Great for corners and edges.
Pull off the release liner and stick.
Use the Power Punch to make holes for your rope.
Use the Banner Tape for more banner strength
They have a strong self adhesive on them.
Fold and Press
No Sewing, Grommeting or Special Tools required.
The neck loop on PowerTabs® and EdgeTabs® is only intended for light-duty use. Placing the rope through the tab center hole give much greater outdoor strength. As a result, many of our customers cut off the neck loop in order to prevent improper installation. With BravoTabs®, there is no neck loop to cut off. That saves time.
BravoTabs® are square in shape so they work great for both corners and along edges. One tab fits all!* Please note in strong winds or rainy areas its advisable to stabilize the GRIP on the banner with a simple grommet*
For banners up to about 6 ft in length, we recommend using four BravoTabs® at the banner corners. For banners over 6 ft in length, we recommend adding tabs along the edges about every 2-3 feet.
Using the PowerPunch® is the safest and easiest way to punch the tab center hole in the media. The PowerPunch® hole is perfectly sized and the PowerPunch® punches the hole at just the right position. Using a knife to cut the center hole is possible, but risky because if the tab is cut slightly it may diminish the banner strength significantly. The PowerPunch® is reasonably priced and heavy duty for long life.